As opposed to a sit-down unit, the stand-up forklift model is completely different to utilize. The method wherein you pick up loads and your movements are completely different. If you do not have correct training for operating a stand-up model, you can probably cause harm co-employees or to yourself. When using a stand-up unit, you should follow the proper safety rules. There are some basic operating standards that should be met when operating a stand-up model.
When beginning, stand up on the forklift so as to get a feel for the steering knob and the controls. The steering is handled using the knob steering plate rather than a steering wheel. Remember that this knob moves exceptionally fast, thus, you must be accustomed to moving it gently in order to be sure not to over steer. The horn is situated on the control handle, like with the control for the fork movement and for backwards, forwards. The floor pedal allows the equipment to move.
Turn the key to start the forklift's engine when you are ready to start. The forks should be retracted at this stage. If you are moving around the floor, the forks must be pointed a little upwards. Do not drive with extended forks. If you are traveling forwards, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be certain to beep your horn to warn people around you. Look behind you before stepping on the pedal so as to make sure the way is clear and safe. Then, while stepping on the pedal, pull the control handle towards you. Always stay alert and focused and make sure that you are operating in a safe manner at all times.
When it comes to turning corners, turn your steering knob in the direction you need to go while keeping your foot on the power pedal and your hand on the control handle. When turning right, the steering knob will move in a clockwise direction while moving forward. If you are turning left, your steering knob will go in a counter-clockwise direction.
The stand-up units take some getting used to, especially if you have just operated sit down units. With some training and taking some time to know the machine, you can quickly and efficiently handle loads in little time.